Engineering

• Two Stage Design
  • Pressure reduction is done in two stages to ensure constant outlet pressure irrespective of changes in inlet pressure within range
• Safety features such as:
  • OPSO
    • Over Pressure Shut Off – Regulator gets shut off in case of excess downstream pressure i.e. value exceeding desired one, to ensure safety at consumer end
  • UPSO
    • Under Pressure Shut Off – Regulator gets shut off in case of lack of downstream pressure i.e. value lower than desired one, to ensure safety at consumer end
  • CRV
    • Creep Relief Valve – Regulator relives excess pressure, in case of momentary surge of downstream pressure, to ensure constant outlet pressure and un-interrupted gas supply
  • Excess Flow Shut Off
    • Regulator gets shut off, in case of higher flow than designed one to ensure safety at consumer end
  • Built In Filter
    • To prevent any impurities going in to regulator and affecting performance of the same
• High Accuracy up to AC5
• Excellent Tight Shut-off performance up to SG10
• High Reliability – Millions of Mesura regulators operating world-wide since 1949